Install Instruction - 40 series Soundguard

Part Number: FSS_OEM_201_3R

John Deere 40 series ashtray replacement cup and phone holder replacement install guide. For any Questions email: info@farmsipsupreme.com

Key power should be off until directed to check for operation. 

Step 1: Feed the power wire through your interior in the factory ashtray location. Mount the RH wall and secure the cup holder with the factory ashtray screws. Use  hand tools only for the mounting screws.  

Step 3: Run the power wire from the cup holder up to the ROPS column behind the cover. Wire path  shown with arrows:  

Step 4: Wire continues its path behind the headliner to the radio. Remove the radio bezel.

Step 5: Identify the red and black wires on the radio plug's side. These correlate to the red and  black wires from the cup holder.  

Step 6: Using the included wiretaps, crimp the tap onto the black and red wire. Fold the tap over the wire and crimp the tap. Confirm the tap is fully latched like in the third photo. 

Step 7: Insert the cupholder power wires into the tap. Confirm it is fully seated: 

Step 8: Turn the tractor key power on. The cup lights and USB charger should power up. Install  the radio back into its factory location taking caution to not pinch any wires. If they do not  power up, confirm your connections are fully seated.  

Rev 1 – 2/2024